INDUSTRIAL THIN KERF SAW BLADES CMT ITK blades are designed to best utilise the power of your sawbench by reducing the width of the cut and so reducing the amount of waste and making more power available for cutting. CMT make their blades from top quality German steel hardened to 44 Rockwell and the centre bore, sound dampening channels and heat expansion slots are accurately laser cut out to give optimum performance. Another secret with thin kerf saw blades is to leave one tooth every so often (usually every third one) with a flat top so the blade has less tendency to wander as well as leaving a nice flat bottomed cut when trenching.
SAW BLADES FOR MACHINERY This is a range of high quality tungsten carbide tipped saw blades which will produce outstanding results on circular sawbenches and mitre saws. As with all CMT products these blades are made to the highest standards of design and manufacture with only the best quality materials being used throughout.
They are offered in six different types, coarse tooth pitch for ripping, medium for general purpose work, fine and extra fine for precise and accurate crosscutting, trapezoidal or triple chip for clean cutting of plywood and a 40° alternate bevel design for the ultimate finish on faced boards. The correct choice of blade for a particular job is important if best results are to be achieved and we are confident that the range offered here should be sufficient to cover all sawing applications, from rough timber preparation to finish cutting of veneered boards.
All blades are provided with a 30mm diameter mounting hole plus provision for two different pin hole arrangements where required. We stock a range of spacers to adapt the blade bore to diameters less than 30mm. Please request the correct spacer when ordering.
Become a woodturning member and receive 10% discount on woodturning blanks & finishing products. Throughout the year you will also receive 4 newsletters with the latest offers.