Robert Sorby Fluted Parting Tool - 832H

Robert Sorby Fluted Parting Tool     1/16"

This tool has a milled flute running along the bottom edge, creating two sharp spurs at the cutting face. These sever the fibres to produce a burnished finish. The tapered profile also reduces the risk of binding in the cut. This features a radically new and unique cutting profile with a blade profile of only 2mm. The long bevel has a milled flute which is the cutting face. The small bevel his the sharpening face. When parting off, this unique arrangement causes the tip to always cut at a shear cutting angle of 45º, producing a finish without equal from a parting tool, virtually eliminating the need for sanding.

1/16" -2mm   Length    18 1/2"  

Robert Sorby Fluted Parting Tool 1/16"

This features a radically new and unique cutting profile with a blade profile of only 2mm.  The long bevel has a milled flute which is the cutting face.  The small bevel is the sharpening face.  When parting off this unique arrangement causes the tip to always cut at a shear cutting angle of 45 degrees , producing a finish without equal from a parting tool, virtually eliminating the need for sanding. 

1/16"      Length     18 1/2"